Starter Fertilizer

Product Features

• Premium formula with emphasis on "slow release" nitrogen

• Uniform growth response over a longer period of time

• Low burn potential

• Formulated for the Rocky Mountain Region Area

Product Details

• Total Nitrogen (N) 15.0%

• Analysis: 3.76% Polymer Coated SCU Nitrogen & 11.24%

Ammoniacal Nitrogen

• Available Phosphoric Acid (P₂0₅) 30.0%

• Soluble Potash (K₂0) 15.0%

• Sulfur (S) 1.0%

• 40 Pound Bag

• 20 Pound Bag

Product Recommendations

1. Soil Test: If your soil has not been tested for nutrients, consult your local garden store or county agent THE RIGHT FORMULA IS IMPORTANT.

2. Loosen the Soil: Start with a power rototiller, garden tractor, or spade to a depth of 6 to 8 inches.

3. Level and Set Desired Slope: After loosening soil, rake to remove clods and level to desired slope.

4. Fertilize and Pre-Water: For even distribution use a spreader to apply JIRDON STARTER FERTILIZER. Work fertilizer into seedbed and rake in seed. Water deeply to settle soil particles and insure adequate moisture reserve.

5. Application Rate: Apply 8 lbs. per 1,000 square feet.